Awesome Tips 5 Ways to Remove Stripped Screws
We’ve all run into a stripped screw that needs removing. But what are the best ways to do this? We’ve put together the 5 simplest ways for you to say screw it and get that thing out of there. Do you have your own methods? Sound off in the comments!
We’ve all run into a stripped screw that needs removing. But what are the best ways to do this? We’ve put together the 5 simplest ways for you to say screw it and get that thing out of there. Do you have your own methods? Sound off in the comments!
I am on facebook!
I am on twitter:
Deals for Days. Big home savings are happening now.
I used the hammer method and it actually worked like the video. 10/10 would use again.
I have a small stripped screw on the side of my AC window unit. None of these worked for me. I'm so frustrated because this is the only screw I had left to take out so I could remove the cabinet so I could clean the unit, Now its just sitting on my carport.
i actually got a mini plasma globe yesterday and stripped the screw when i tried to unscrew it to access the battery .-.
But steel
Thanks for the video. I had to remove 2 screws from my bumper. They were torx screws and rusted. The screws were stripped out. I finally used my dremel and cut a line in the middle of the screw. I didn;t know it was going to work, but once I got my flat head phillips in the screw, with a bit force, it freaking worked. Did the same for the other screw, managed to remove both screws. (Although, in the end, I couldn't remove the bumper as the there was one screw left, would not come out, just keeps turning…..)
😂😂😂 But if the bolt stuck on engine block youll grind the engine 😁
Cant stand butter screws, cheap Chinese metal.
Awsome
when there's an ULTRA cheap brass screw holding your door striker in place, and it horribly PLUS it's flush mount so a lot of these techniques won't work
and with that screw stuck in place, you can't replace your door lock hardware ever
Schlage, not even once
Left-handed drill bit
Wow, the last one was amazing, simple enough.
Well….I tried the duct tape and IT DIDN'T WORK….aleast not for me. 😠😠 I'm not mad at yippy, just frustrated as all hell
You can always just say screw it….. Kinda the opposite reason why I came here
Hit the screwdriver with hammer into it and bam
What if they are screws in an outlet that were severely stripped years ago when someone else put them in? We are talking tiny screws but I've never seen screws stripped this bad before.
Thanks!
THANK YOU!!!!!!!!!!!!!! Was stressing about the pain of going to the hardware store and back, and blah, blah, blah. You saved me stress and time. 🙂
Thanks but I'm in a confined space
what if its ps4 controller 😀 i cant just use saw to break it apart 😀 or drill into it 😀
Have got a screw stuck in laptop that m tryin to open
….. Its head is now completely broken…. It s lookin lyk a round depression over its head…..none of the screw driver is working now into it.. …… Idk how to open that
Help me pls
0:37 why do I find this so funny
SUPER useful, you saved my life, thank you 🙂
The pliers worked
Thank you very much your advice worked very cool
The last one actually works i just cut my laptop into 2 pieces.7 no screws,no problems ..thnkx alot 😂
Straight to the point, i like
yay! i am nailing my screw! ty for sharing.
screw screws
Stripped screws drive you nuts? Drill for a bit, don't bolt.
The end 😂😂 But thank you! The duct tape method worked well on my iphone.
mo of this shity advise worked im so pissed *!!!!!!!
great video, Mahalo
OMG, I love the last option 😂
try stripping it aggressively and then using a square driver.
I have a stripped torx screw size 8 on my knife the is stripped and i have tried tape and a rubber band and it still wont work. Any ideas on how to remove ?
I end up with saying SCREW IT most of the time
thank you!!!!!